Laboratory Equipments

Aspirator Bottles

Aspirators bottles are made of Polyproplene and therefore much more lighter than glass.These are autoclavable ,durable and dependable.The leakprof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water and other laboratory solutions. Threads should be  totally disengaged befor autoclaving.

Aspirator Bottles are available in three sizes 5 Ltr, 10 Ltr, 20 Ltr.

Burette

This burette has a transparent body and a leakprof stapcock fitted with a self lubrication PTFE plug. Each burette is individually calibrated to give maximum accuracy.Acrylic body is unaffected by gilute minerals acids and bases except Hydrofloric Acid & Ammonium Hydroxide. The ph range of 1-14 is ideal and can be used up to 5 5 wt/wc of acid or 30% bases.

Burette are availavle in 25ML and 50ML.

Coplin Jar

Coplin Jar is made of Polypropylene can hold 5 slides of the size 1x3 inch back to back. The interior of the coplin jar is grooved in a way to hold slides in erect position.Domed and shallow thread screw cap provided protectionto the slides.

Desiccator ( Plain)

Plain desiccator are physically the same as Vaccum desicators.Only difference is the absence of stop cock. Grease should be applied the flanges to make it air tight.

It is available in 150ML,200ML,250ML,300ML.

Desiccator ( Vacuum)

Desiccator are made of polyproplene and polycabonate.These autoclavable vaccum desiccators can hold vaccum upto 740 mm of Hg for 24 hours. without any greasing. The top dome ,moulded in rigid and transparent polycarbonate,gives a crystal clear view of the desiccant placed inside.

It is available in 150ML,200ML,250ML and 300ML.

Dropping Bottle

Blown in low density polyethylene ,plasic dropping bottles dispense smalll uniform drops of liquid when presented lightly.

Available in two sizes. 60ML and 125ML.

Funnel- Long Stem

These long stem funnel have smooth walls, 60 degree cone angle and external ribs to prevent air lock .Moulded in polyproplene ,these clear funnels can also be stem autoclaved

It is available in 62MM, 75MM, 100MM.

Measuring Cylinder( Hexagonal Base ) (PP)

Measuring cylinder moulded in polypropylene are single piece cylinder. It is available in 10ML,25ML,50ML,100ML,250ML,500ML.

Measuring Jug

These handy jugs moulded in polyproplene are clear autoclavable and have good chemical resistance .These jugs are provided with a handle for easy and convenient lifting and have raised graduations for easy reading.

It is available in 250ML,500ML,1000ML,2000ML.

Microcentrifuge Tube

Microcentrifuge tubes are quality product for samll volume sampling ,centrifuging or storing.

It is available in basically two sizes. 0.5 ML and 1.5 ML.

Pippette Pump

Pippette pump ia s fast release pipetting device for precise pipetting and zip quick empting.The knurled thumb wheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip quick empting.The moulded chuck has a silicon rubber collect inside to hold various pipettes of standard sizes .It resist acids and alkalies and can be easily disassemble for cleaning.

It comes in two sizes 10ML, 25 ML .

Pipette Stand - Horizontal

This detachable stand can hold 12 pipette ,6 on each side ,in a horizontal position.Moulded in Popyproplene ,this autoclavable stand has two sides which are attached to each other with three metalic rods coated with polypropylene .This stand can be easily disassembled for space saving storage.

Pipette Stand - Vertical

This is stable non corrosive, detachable stand which can hold 28 pipette with maximum dia 14mm. The heavy base measure 225 mm in diameter and a polyproplene coated square rod measuring 375 mm in length is screwed into the base .The tip disc that can be fixed on the rod has holes for holding pipette while thelower one has pilot holed where the pipette tips rest and liquids drain down to the base .These disc can be adjusted on the rod according to the length pipette.The arrows provided on the disc should be kept parellel to ensure that corresponding holesare being centerd .

Reagent Bottle - Narrow Mouth

Theses narrow mouth reagent bottle are available in Polypropylene .The PP bottle are rigid,translucent and have excellent contact clarity.These bottles can be autoclaved filled as well as empty.The polyproplene cap has a built in seal ring to make these bottles leakproof.

Science Lab Equipment

Beaker

Beakers moulded in Polyproplene ,have excellent clarity and very good chemical resitance. These autoclavable beakers have prominently raised graduations on the outer surface.Pouring a solution becomes very convenient because of its tapered spout.
Beakers are available in 50ML,100ML,250ML,500ML,1000ML,2000ML,5000ML.

Beaker TPX

Beaker in TPX is available in 50ML,100ML,250ML,500ML

Droppers ( Graduated)

Droppers are perfect product for quick and safe  transfer of fluid.Long flexible stem can be bent to draw liquid from narrow or small volume tubes into the bulb.

It is available in 3ML non sterile and 3ML sterile droppers.
Looking for Laboratory Equipments ?
© Topsun Enterprises
 
Desktop Site Back to top